RV COMPACT RO MOBILE HOME REVERSE OSMOSIS WATER FILTERS ALKALI ALKALINE FILTER

Mobile Home Reverse Osmosis Water Filters - Compact Reverse Osmosis Water Purifier

Depending on variation selected in drop down menu above we will supply as follows

Item Variable	In Line Post RO Filters	RO Tank
ROC-4-G | GAC Carbon + 2L	1x Activated GAC Coconut Carbon [4-Stage]	2 Litre
ROC-4-A | GAC+Alkalise + 2L	1x Alkalising + Coconut Carbon [4-Stage]	2 Litre
ROC-4-N | Nano Silver + 2L	1x Silver Infused Granular Carbon [4-Stage]	2 Litre
ROC-5-MG | GAC + Min + 2L	1x GAC + 1x Sentry Mineraliser [5-Stage]	2 Litre
ROC-4-G | GAC Carbon + 5L	1x Activated GAC Coconut Carbon [4-Stage]	5 Litre
ROC-4-A | GAC+Alkalise + 5L	1x Alkalising + Coconut Carbon [4-Stage]	5 Litre
ROC-4-N | Nano Silver + 5L	1x Silver Infused Granular Carbon [4-Stage]	5 Litre
ROC-5-MG | GAC + Min + 5L	1x GAC + 1x Sentry Mineraliser [5-Stage]	5 Litre

Our systems are assembled in Queensland using high quality approved parts + we flush and test the membrane + the system is pressure tested at our factory before being dispatched

Fluoride Removal + 99.99% Bacteria Elimination [depending on post filter selected]

Select Post Membrane Filter/s | [SYSTEM DOES NOT INCLUDE A BOOSTER PUMP - 100GPD and 150GPD membranes require water pressure above +/- 45psi or +/- 300kpa to perform optimally. We have a slower 50GPD membrane which is a low-pressure membrane and will start working from +/- 20psi or +/- 135kpa]

Produces +/ - 100gpd (+/- 380 litres per day) + All Filters + Faucet As Pictured + Selected Pressurised RO Accumulator Tank + Waste Clamp + Fittings

The option for an extra RO tank is in case you want to place one tank before the RO unit and one after it to stop pressure cycling and reduce how often your caravan pump kicks in / out. If only your caravan is always connected to mains water supply you should not need a low pressure membrane or an extra tank.

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by +/- 96% depending on environmental factors

This purification process is commonly considered to be the most effective method of purification available to the public and will consistently produce the lowest level of contaminant.

RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products, heavy metals

See below table for effective reduction of common contaminants:

ELEMENT/COMPOUND	% REDUCTION	ELEMENT/COMPOUND	% REDUCTION
Barium	97%	Potassium	100%
Bicarbonate	100%	Radium	97%
Cadmium	97%	Selenium	97%
Calcium (Hardness)	99.90%	Silicate	99.00%
Chromate	95%	Silver	99%
Copper	97%	Sodium	98%
Detergents	97%	Strontium	97%
Fluoride	100%	Sulfate	100%
Lead	97%	PCB’s	97%
Magnesium	100%	Insecticides	97%
Nickel	97%	Herbicides	97%

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

KIT INCLUDES:

• Multi stage reverse osmosis unit:
• Two 5"x2.5" sediment + carbon filter housings.
• One 5"x2.5" 1 micron spun sediment pre-filter.
• One 5"x2.5" 5 micron carbon block pre-filter.
• 1x 100GPD Sentry RO membrane [materials sourced from the USA].
• One or two post filters selected [in line conditioning filters after the membrane per pic's 4-6 and drop down menu].
• Your choice of one of the following accumulator tanks:
• +/- 2 Litre - (25cm height, 16cm diameter).
• +/- 5 Litre - (30cm height, 20cm diameter).
• 1/2" insert - Shares normal cold water line to most mixer taps.
• Your choice of one of the following waste drain clamp fittings:
• 40mm solid clamp.
• 50mm adjustable clamp.
• Modern drinking water faucet as pictured.
• An approved 350kpa pressure reducing valve.
• A housing spanner to open water filter housings.
• Installation kit [includes +/- 4m tubing, thread tape, spare fittings.
• An installation and maintenance guide.

If you need a 50mm waste clamp or 3/4" inlet insert instead of the more common 1/2" one please let us know as we send this item with the 40mm waste clamp as standard

This RO unit has a 24 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing

This listing includes a 350kpa pressure reducing and non-return valve and we also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure which we sell separately in our store

If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns.